To use: just tear the tarp in half and you get two identical parts with one edge of rich grassland, gradually thinning vegetation to the other edge with a clay base. Further application of the foil corresponds to the classic grass foils (gluing with adhesive on dust-free tinted base, possibility of moistening the foil base with water before the actual application).
To achieve a realistic landscape appearance, it is advisable to use a combination of different Model Scene foliations, especially F509, F510, F533, F003 or F006.
Note - the illustration of the application of the foil to the track shows the F541 version.
The use and application of this foil is as easy as with the conventional designs.
1. The substrate to be applied must be free of dust and grease! Anything can be used as a substrate, but it is recommended to paint the substrate a similar shade to the foil colour.
2. The foil that has been pre-shaped (preferably by tearing, the edges are unnaturally straight when cut) must be gently moistened with water from the underside before gluing - preferably with a spray bottle (no need for a wetting agent/detergent) and the water should be left on for 1 minute to soften the foil.
3. We recommend Duvilax BD-20 dispersion adhesive (undiluted!) as an adhesive. This adhesive should be thoroughly brushed onto the substrate so that the adhesive layer is even and thin, it must not form puddles.
4. Place the moistened foil on the adhesive-coated substrate and press gently with your fingers so that the foil follows the surface. Allow to dry.
.png)
