DCC decoder MN330P22, Plux22 connector, non-sound

The latest series of ZIMO MN decoders replaces the non-sound decoders of the older MX series. The decoder is designed for models with a Plux22 interface.

The decoder comes with factory settings as standard.

To simplify installation, you can order the decoder pre-configured for a specific model type—this primarily involves settings for lights and motor parameters.

By default, we set the following configuration:

F0 - Position lights according to direction of travel

F1 - Tail lights according to direction of travel

F2 - Independent main headlight according to direction of travel

F3 - Shunting mode

F5 - Cab light, passenger compartment light

SUSI - Off

Select the appropriate setting from the menu in the top right corner.

Note: The settings are often the same for an entire series of locomotives, such as all Zamračené/Brejlovce MTB models, etc.

Before purchasing, check the interface on the model you have. Some manufacturers have changed the circuit boards, including the supported interface, during production. In some cases, it may also be necessary to adjust the weights in the model.

When purchasing a model that includes a decoder, installation and setup of the decoder are included in the price as a bonus.

Stock availability is approximate. We will be happy to provide exact information on stock availability upon request.